PR90 EXP- SERIES (Paint Coating Remover/Stripper)
PR90 EXP- SERIES (Paint Coating Remover/Stripper)
PR90 EXP- SERIES (Paint Coating Remover/Stripper)
PR90 EXP- SERIES (Paint Coating Remover/Stripper)
  • Load image into Gallery viewer, PR90 EXP- SERIES (Paint Coating Remover/Stripper)
  • Load image into Gallery viewer, PR90 EXP- SERIES (Paint Coating Remover/Stripper)
  • Load image into Gallery viewer, PR90 EXP- SERIES (Paint Coating Remover/Stripper)
  • Load image into Gallery viewer, PR90 EXP- SERIES (Paint Coating Remover/Stripper)

PR90 EXP- SERIES (Paint Coating Remover/Stripper)

Regular price
RM1,365.00 MYR
Sale price
RM1,365.00 MYR
Regular price
Sold out
Unit price
per 

(NW10AL) Paint Coating Removal/Stripping (Alkaline & Aqueous Concentrated Paint Stripper)

 Description
  • Effectively remove most paints use in industrial, ED coating, wet paints, inks use in commercial printing process, adhesives, asphalt, tar, other manufactured coatings.
  • Conforms to RoHS & REACH which do not have chemical substances of very high concern (SVHC)
Features & Benefits
  • Cost saving - Long bath life/ bulk quantity depainting.
  • Economical - Low initial start up costs (Water Dilutable)
  • Environmental friendly
  • Effective result and time saving on paint stripping from 15min to 2 hours @temperature 80C 
  • Recovered expensive components/parts & jig fixtures
  • Non-carcinogenic, Non-chlorinated, non-acid & non-phenol
  • Low odor - Improves employee safely.
Uses & Applications
  • Removal of paint type: ED Coating, wet paint, powder coat, epoxy, Polycarbonate, Arcylic, Polyurethane, Solvent & water based paint, 1K & 2Kcoating systems
  • Removal of ink type: Lithographic, flexographic, gravure, screen and commercial printing process
  • Used to remove adhesives, asphalt/tar & other coatings
  • Recommended for uses stainless steel, mild steel & cast iron material
  • Not compatible on aluminim, zinc, lead & its alloy
  • Test before use on plastic material
How to use
  • Designed for se in automated/ immersion tank, "spray and ultrasonic cleaning equipment
  • Continuous agitation is recommended
  • Not recommended for hand wipe cleaning applications
  • Pre-degreasing with Nexchemie Aerokleen 1000LF if the part contaminated with heavy oil or grease
  • Immerse recovered parts/jigs by using Nexchemie PR90 EXP
  • Recommended operating temperature: 60C ~ 90C
  • Pressure water rinsing after the parts completely strip

Recommended dosing ratio:

  • PR90 EXP Additive A : 400ml (40% v/v)
  • PR90 EXP Additive B : 150ml (15% v/v)
  • Water : 450ml (45% v/v)
     Packaging
    Price
    21 KG/Pail MYR 1365.00/ Pail
    30 KG/Pail MYR 1950.00/ Pail